User's Manual

Algorithm: Enforced

This setting specifies the WAN connection usage to be applied on the specified IP protocol and port. This

setting is applicable only when Algorithm is set to Enforced.

Matching traffic will be routed through the specified WAN connection, regardless of the health check

status of the WAN connection. Outbound traffic can also be enforced to go through a specified

SpeedFusion

connection.

Algorithm: Priority

This setting specifies the priority of the WAN connections used to route the specified network service. The

highest priority WAN connection available will always be used for routing the specified type of traffic. A

lower priority WAN connection will be used only when all higher priority connections have become

unavailable.

Starting from Firmware 5.2, outbound traffic can be prioritized to go through SpeedFusion

connection(s).

By default, VPN connections are not included in the priority list.

Tip

Configure multiple distribution rules to accommodate different kinds of services.

https://www.peplink.com

106