User's Manual

ManualsBrandsPEPWAVE ManualsElectronicsPEPWAVE / peplink Wireless Product

101

102

103

104

105

106

107

108

109

110

● Fastest Response Time

For a full explanation of each Algorithm, please see the following article:

https://forum.peplink.com/t/exactly-how-do-peplinks-load-balancing-algorithmns-work/8059

Load Distribution

Weight

This is to define the outbound traffic weight ratio for each WAN connection.

When No

connections are

available

This field allows you to configure the default action when all the selected Connections are

not available.

Drop the Traffic - Traffic will be discarded.

Use Any Available Connections - Traffic will be routed to any available Connection, even

it is not selected in the list.

Fall-through to Next Rule - Traffic will continue to match next Outbound Policy rule just

like this rule is inactive.

Terminate

Sessions on Link

Recovery

This setting specifies whether to terminate existing IP sessions on a less preferred WAN

connection in the event that a more preferred WAN connection is recovered. This setting is

applicable to the Priority algorithms. By default, this setting is disabled. In this case,

existing IP sessions will not be terminated or affected when any other WAN connection is

recovered. When this setting is enabled, existing IP sessions may be terminated when

another WAN connection is recovered, such that only the preferred healthy WAN

connection(s) is used at any point in time.

Expert Mode is available on some Pepwave routers for use by

advanced users. To enable the feature, click on the help icon and

click turn on Expert Mode.

In Expert Mode, a new special rule, SpeedFusion

Routes, is

displayed in the Custom Rules table. This rule represents all

SpeedFusion

routes learned from remote VPN peers. By

default, this bar is on the top of all custom rules. This position

means that traffic for remote VPN subnets will be routed to the

corresponding VPN peer. You can create custom Priority or

Enforced rules and move them

above the bar to override the SpeedFusion

routes.

Upon disabling Expert Mode, all rules above the bar will be

removed.

https://www.peplink.com

103