Users Manual

https://www.peplink.com 177 Copyright @ 2019 Peplink
Upload
Configurations
from High
Availability Pair
In a high availability (HA) configuration, the Balance unit can quickly load the configuration
of its HA counterpart. To do so, click the Upload button. After loading the settings,
configure the LAN IP address of the Peplink Balance unit so that it is different from the HA
counterpart.
11.1.10 Feature Add-ons
Some balance models have features that can be activated upon purchase. Once the purchase is
complete, you will receive an activation key. Enter the key in the Activation Key field, click Activate, and
then click Apply Changes.
11.1.11 Reboot
This page provides a reboot button for restarting the system. For maximum reliability, the Peplink Balance
Series can equip with two copies of firmware, and each copy can be a different version. You can select
the firmware version you would like to reboot the device with. The firmware marked with (Running) is the
current system boot up firmware.
Please note that a firmware upgrade will always replace the inactive firmware partition.