User's Manual

https://www.peplink.com 67 Copyright @ 2019 Peplink

When No

connections are

available

This field allows you to configure the default action when all the selected Connections are

not available.

Drop the Traffic - Traffic will be discarded.

Use Any Available Connections - Traffic will be routed to any available Connection, even

it is not selected in the list.

Fall-through to Next Rule - Traffic will continue to match next Outbound Policy rule just

like this rule is inactive.

Expert Mode is available on some Pepwave routers for use by

advanced users. To enable the feature, click on the help icon and

click turn on Expert Mode

In Expert Mode, a new special rule, SpeedFusion

Routes, is

displayed in the Custom Rules table. This rule represents all

SpeedFusion

routes learned from remote VPN peers. By

default, this bar is on the top of all custom rules. This position

means that traffic for remote VPN subnets will be routed to the

corresponding VPN peer. You can create custom Priority or

Enforced rules and move them

above the bar to override the SpeedFusion

routes.

Upon disabling Expert Mode, all rules above the bar will be

removed.

Algorithm: Weighted Balance

This setting specifies the ratio of WAN connection usage to be applied on the specified IP protocol and

port. This setting is applicable only when Algorithm is set to Weighted Balance.