User's Manual

https://www.peplink.com 58 Copyright @ 2019 Peplink
Default: 10
WAN
Smoothing
A
While using PepVPN, utilize multiple WAN links to reduce the impact of packet loss and get
the lowest possible latency at the expense of extra bandwidth consumption. This is suitable
for streaming applications where the average bitrate requirement is much lower than the
WAN's available bandwidth.
Off - Disable WAN Smoothing.
Normal - The total bandwidth consumption will be at most 2x of the original data traffic.
Medium - The total bandwidth consumption will be at most 3x of the original data traffic.
High - The total bandwidth consumption depends on the number of connected active
tunnels.
A
- Advanced feature, please click the button on the top right-hand corner to activate.
To enable Layer 2 Bridging between PepVPN profiles, navigate to Network>LAN>*LAN Profile Name*
8.41
WAN Connection Priority
WAN
Connection
Priority
If your device supports it, you can specify the priority of WAN connections to be used for
making VPN connections. WAN connections set to OFF will never be used. Only available
WAN connections with the highest priority will be used.
To enable asymmetric connections, connection mapping to remote WANs, cut-off latency,
and packet loss suspension time, click the button.
Peplink Balance IPsec VPN functionality securely connects one or more branch offices to your
company's main headquarters or to other branches. Data, voice, and video communications between