User's Manual

https://www.peplink.com 52 Copyright @ 2019 Peplink
address when hosts on the WAN access services served on this device (e.g., web admin
accesses from WAN, DNS server, etc.)
WAN Default
Gateway
Enter the WAN router's IP address in this field. If there are more hosts in addition to the
router on the WAN segment, click the button next to “WAN Default Gateway” and check
the I have other host(s) on WAN segment box and enter the IP address of the hosts that
need to access LAN devices or be accessed by others.
WAN DNS
Servers
Enter the selected WAN's corresponding DNS server IP addresses.
A
-
Advanced feature, please click the button on the top right-hand corner to activate.
7.2.3 Port Settings
To configure port settings, navigate to Network > Port Settings
This section allows you to:
● enable or disable specific LAN ports
● Configure the negotiation speed of the LAN ports
● Configure the port type (Trunk or Access)
● Assign a VLAN to a LAN port (in Access mode)