User's Manual

https://www.peplink.com 49 Copyright @ 2019 Peplink
TTL manually, click . Click to create a new record. Click to remove a
record.
Domain
Lookup Policy
DNS proxy will look up the domain names defined here using only the specified
connections.
DNS
Resolvers
A
Check the box to enable the WINS server. A list of WINS clients will be displayed at
Network>LAN>DNS Proxy Settings>DNS Resolvers.
This field specifies which DNS resolvers will receive forwarded DNS requests. If no
WAN/VPN/LAN DNS resolver is selected, all of the WAN’s DNS resolvers will be selected.
If a SpeedFusion
TM
peer is selected, you may enter the VPN peer’s DNS resolver IP
address(es).
Queries will be forwarded to the selected connections’ resolvers. If all of the selected
connections are down, queries will be forwarded to all resolvers on healthy WAN
connections.
A
- Advanced feature, please click the button on the top right-hand corner to activate.
Finally, if needed, configure your Bonjour forwarding settings. Once all settings have been entered, click
Save to store your changes.
Bonjour Forwarding Settings
Enable
Check this box to turn on Bonjour forwarding.
Bonjour
Service
Choose Service and Client networks from the drop-down menus, and then click to
add the networks. To delete an existing Bonjour listing, click .
Bonjour Forwarding is supported on
All Balance models, MAX 700, HD2, HD4
Drop-In Mode
Drop-in mode (or transparent bridging mode) eases the installation of the Peplink Balance on a live
network between the firewall and router, such that changes to the settings of existing equipment are not
required.