User's Manual

https://www.peplink.com 47 Copyright @ 2019 Peplink
In case of a network address conflict with remote peers (i.e. PepVPN / IPsec VPN / IP Forwarding WAN
are considered as remote connections), you can define Virtual Network Mapping to resolve it.
Note: OSPF & RIPv2 settings should be updated as well to avoid advertising conflicted network.
See: https://youtu.be/C1FMdZCn3Z8
Virtual Network Mapping
One-to-One
NAT
Every IP Address in the Local Network has a corresponding unique Virtual IP Address for
NAT.
Traffic originating from the Local Network to remote connections will be SNAT'ed and
behave like coming from the defined Virtual Network.
While traffic initiated by remote peers to the Virtual Network will be DNAT'ed accordingly.
Many-to-One
NAT
The subnet range defined in Local Network will be mapped to a single Virtual IP Address for
NAT. Traffic can only be initiated from local to remote, and these traffic will be NAT'ed and
behaves like coming from the same Virtual IP Address.
WINS Server Settings
Enable
Check the box to enable the WINS Server. A list of WINS clients will be displayed at
Status>WINS Clients.
Enter any needed DNS proxy settings. Once all settings have been entered, click Save to store your
changes.