User's Manual

https://www.peplink.com 46 Copyright @ 2019 Peplink
DHCP Relay Settings
DHCP Relay
Enter the address of the DHCP server here. DHCP requests will be relayed to it.
DHCP Server
IP Address
DHCP requests from the LAN are relayed to the entered DHCP server.
For active-passive DHCP server configurations, enter active and passive DHCP server IPs
into the DHCP Server 1 and DHCP Server 2 fields.
DHCP Option
82
This feature includes device information as relay agent for the attached client when
forwarding DHCP requests from a DHCP client to a DHCP server. Device MAC address and
network name are embedded to circuit ID and Remote ID in option 82.
DHCP Relay
Logging
Check this box to log DHCP relay activity.
7.2.2 Network Settings (Common Settings)
Static Route Settings
Static Route
This table is for defining static routing rules for the LAN segment. A static route consists of
the network address, subnet mask, and gateway address. The address and subnet mask
values are in w.x.y.z format.
The local LAN subnet and subnets behind the LAN will be advertised to the VPN. Remote
routes sent over the VPN will also be accepted. Any VPN member will be able to route to
the local subnet. Click to create a new route. Click to remove a route.
Entries in this list will allow traffic to route to a different subnet that is connected to the LAN
interface. Any traffic destined for a network/mask pair will be directed to the corresponding
gateway instead of routed through WANs.