User's Manual

https://www.peplink.com 44 Copyright @ 2019 Peplink
bridge connected
If you choose to override IP address when the VPN is connected, the device will
not act as a router, and most Layer 3 routing functions will cease to work.
DHCP Option 82
Click on the question Mark if you want to enable DHCP Option 82.
This allows the device to inject Option 82 with Router Name information before
forwarding the DHCP Request packet to a PepVPN peer, such that the DHCP
Server can identify where the request originates from.
DHCP Server Settings
DHCP Server
When this setting is enabled, the DHCP server automatically assigns an IP
address to each computer that is connected via LAN and configured to obtain an
IP address via DHCP. The Pepwave router’s DHCP server can prevent IP
address collision on the LAN.
DHCP Server
Logging
Enable logging of DHCP events in the eventlog by selecting the checkbox.
IP Range &
Subnet Mask
These settings allocate a range of IP addresses that will be assigned to LAN
computers by the Pepwave router’s DHCP server.
Lease Time
This setting specifies the length of time throughout which an IP address of a
DHCP client remains valid. Upon expiration of the lease time, the assigned IP
address will no longer be valid and renewal of the IP address assignment will be
required.
DNS Servers
This option allows you to input the DNS server addresses to be offered to DHCP
clients. If
Assign DNS server automatically
is selected, the Pepwave router’s