User's Manual

https://www.peplink.com 43 Copyright @ 2019 Peplink
Network Settings
Name Enter a name for the LAN.
VLAN ID
Enter a number for your VLAN.
Inter-VLAN routing Check this box to enable routing between virtual LANs.
Layer 2 PepVPN Bridging
PepVPN Profiles
to Bridge
The remote network of the selected PepVPN profiles will be bridged with this local
LAN, creating a Layer 2 PepVPN, they will be connected and operate like a single
LAN, and any broadcast or multicast packets will be sent over the VPN.
Remote Network
Isolation
Enable this option if you want to block network traffic between the remote
networks, this will not affect the connectivity between them and this local LAN.
Spanning Tree
Protocol
Click the box will enable STP for this layer 2 profile bridge.
Override IP
Address when
Select "Do not override" if the LAN IP address and local DHCP server should
remain unchanged after the Layer 2 PepVPN is up.