User's Manual

https://www.peplink.com 42 Copyright @ 2019 Peplink
a WAN’s IP address did not change.
7.2 LAN
7.2.1 Network Settings
LAN interface settings are located at Network>LAN>Network Settings. Navigating to that page will
show the following dashboard:
This represents the LAN interfaces that are active on your router (including VLAN). A grey “X” means that
the VLAN is used in other settings and cannot be deleted. You can find which settings are using the
VLAN by hovering over the grey “X”.
Alternatively, a red “X” means that there are no settings using the VLAN. You can delete that VLAN by
clicking the red “X”
Clicking on any of the existing LAN interfaces (or creating a new one) will show the following :
IP Settings
IP Address The IP address and subnet mask of the Pepwave router on the LAN.