User's Manual

https://www.peplink.com 130 Copyright @ 2019 Peplink
Pre-shared Key
Enter your pre shared key in the text field. Please note that remote devices will
need this preshared key to access the Balance.
Listen On This setting is for specifying the WAN IP addresses that allow remote user access.
Disable Weak
Ciphers
Click the button to show and enable this option.
When checked, weak ciphers such as 3DES will be disabled.
Continue to configure the authentication method.
7.14.2 OpenVPN
Select OpenVPN and continue to configure the authentication method.
The OpenVPN Client profile can be downloaded from the Status > device page after the configuration
has been saved.
You have a choice between 2 different OpenVPN Client profiles.
8
"route all traffic" profile
Using this profile, VPN clients will send all the traffic through the OpenVPN tunnel
9
"split tunnel" profile
Using this profile, VPN clients will ONLY send those traffic designated to the
untagged LAN and VLAN segment through the OpenVPN tunnel.
9.1.1 PPTP
No additional configuration required.
The Point-to-Point Tunneling Protocol (PPTP) is an obsolete method for implementing virtual private