User's Manual

https://www.peplink.com 110 Copyright @ 2019 Peplink
Enable
Check Enable and then, optionally, select the LANs/VLANs that will use the captive
portal.
Hostname
To customize the portal’s form submission and redirection URL, enter a new URL
in this field. To reset the URL to factory settings, click Default.
Access Mode
Click Open Access to allow clients to freely access your router. Click User
Authentication to force your clients to authenticate before accessing your router.
Select External Server to use the Captive Portal with a HotSpot system.
As described in the following knowledgebase article:
https://forum.peplink.com/t/using-hotspotsystem-wi-fi-on-pepwave-max-
routers/
RADIUS Server
This authenticates your clients through a RADIUS server. After selecting this
option, you will see the following fields:
Fill in the necessary information to complete your connection to the server and
enable authentication.
LDAP Server
This authenticates your clients through a LDAP server. Upon selecting this option,
you will see the following fields:
Fill in the necessary information to complete your connection to the server and
enable authentication.
Access Quota
Set a time and data cap to each user’s Internet usage.
Quota Reset
Time
This menu determines how your usage quota resets. Setting it to Daily will reset it
at a specified time every day. Setting a number of minutes after quota reached
establish a timer for each user that begins after the quota has been reached.