User's Manual

https://www.peplink.com 10 Copyright @ 2019 Peplink
● SpeedFusion performance analyzer
● X.509 certificate support
● Bandwidth bonding and failover among selected WAN connections
● Ability to route traffic to a remote VPN peer
● Optional pre-shared key setting
● Layer 2 bridging
● Layer 2 Peer Isolation
● SpeedFusion
TM
throughput, ping, and traceroute tests
● Built-in L2TP / PPTP / OpenVPN VPN server
● Authenticate L2TP / PPTP clients using RADIUS and LDAP servers
● Multi-Site PepVPN Profile
● IPsec VPN for network-to-network connections
● L2TP / PPTP and IPsec passthrough
● Simultaneous L2 & L3 VPN tunnel between the same pair of devices
Inbound Traffic Management
● TCP/UDP traffic redirection to dedicated LAN server(s)
● Inbound link load balancing by means of DNS
Outbound Policy
● Link load distribution per TCP/UDP service
● Persistent routing for specified source and/or destination IP addresses per TCP/UDP service
● Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms
● Time-based scheduling
AP Controller
● Configure and manage Pepwave AP devices
● Review the status of connected AP
QoS
● Quality of service for different applications and custom protocols
● User group classification for different service levels
● Bandwidth usage control and monitoring on group- and user-level