Specifications

C
OPYRIGHT
& T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
10.6 Event Log
The Event Log displays a list of all events associated with your access point. Check Auto
Refresh to refresh log entries automatically. Click the Clear Log button to clear the log.
11 Restoring Factory Defaults
To restore the factory default settings on a Pepwave AP One router, follow the steps below:
1. Locate the reset button on the front or back panel of the Pepwave AP One router
.
2
. With a paperclip, press and keep the reset button pressed.
Note: There is a dual function to the reset button.
Hold for 5 seconds for admin password reset (Note: The LED status light blinks in RED 2 times
and release the button, green status light starts blinking)
Hold for 5 seconds for factory reset (Note: The LED status light blinks in RED 3 times and
release the button, all WAN/LAN port lights start blinking)
After the Pepwave AP One router finishes rebooting, the factory default settings will be restored.
Important Note