Specifications

C
OPYRIGHT
& T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
Scanning Time
This setting specifies the time, in milliseconds, that your access point scans any
particular channel while searching for nearby networks.
Scheduled Radio
Availability
Click Custom Schedule to specify radio availability schedule options or select Always
On to make the radio continuously available.
WMM
This checkbox enables Wi-Fi Multimedia (WMM), also known as Wireless Multimedia
Extensions (WME), on your access point. The default is enabled.
8.3 WDS
A wireless distribution system (WDS) provides a way to link access points when wires
are not feasible or desirable. A WDS can also extend wireless network coverage for
wireless clients. Note that your access point’s channel setting should not be set to Auto
when using WDS.
To create a new WDS, click Add.
WDS
Enable
Check this box to enable WDS.
MAC Address
Enter the MAC address of the access point with which to form a WDS link.