User's Manual

https://www.peplink.com
158
Copyright @ 2020 Pepwave
Management VLAN
ID
This field specifies the VLAN ID to tag to management traffic, such as AP to AP
controller communication traffic. The value is 0 by default, meaning that no VLAN
tagging will be applied. NOTE: change this value with caution as alterations may
result in loss of connection to the AP controller.
Operating
Schedule
Choose from the schedules that you have defined in System>Schedule
. Select
the schedule for the integrated AP to follow from the drop-down menu.
Beacon Rate
A
This drop-
down menu provides the option to send beacons in different transmit
bit rates. The bit rates are 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, and 11Mbps.
Beacon Interval
A
This drop-
down menu provides the option to set the time between each beacon
send. Available options are
100ms
,
250ms
, and
500ms
.
DTIM
A
This field provides the option to set the frequency for beacon to include delivery
traffic indication message (DTIM). The interval unit is measured in milliseconds.
RTS Threshold
A
This field provides the opti
on to set the minimum packet size for the unit to send
an RTS using the RTS/CTS handshake. Setting 0 disables this feature.
Fragmentation
Threshold
A
Determines the maximum size (in bytes) that each packet fragment will be broken
down into. Set 0 to disable fragmentation.
Distance/Time
Converter
A
Select the distance you want your Wi-
Fi to cover in order to adjust the below
parameters. Default values are recommended.
Slot Time
A
This field provides the option to modify the unit wait time before it transmits. The
default value is
9
μs.
ACK Timeout
A
This field provides the option to set the wait time to receive acknowledgement
packet before doing retransmission. The default value is
48
μs.
Frame
Aggregation
A
With this feature enabled, throughput will be increased by sending two or more
data frames in a single transmission.
Frame Length
This field is only available when
Frame Aggregation
is enabled. It specifies the
frame length for frame aggregation. By default, it is set to 50000.
A
- Advanced feature. Click the button on the top right-hand corner to activate.
Web Administration Settings