User's Manual

https://www.peplink.com
153
Copyright @ 2020 Pepwave
Broadcast SSID
This setting specifies whether or not Wi-
Fi clients can scan the SSID of this
wireless network. Broadcast SSID is enabled by default.
Data Rate
A
Select Auto to allow the Pepwave router to set the data rate automatically, or
select Fixed and choose a rate from the displayed drop-down menu.
Multicast Filter
A
This setting enables the filtering of multicast network traffic to the wireless
SSID.
Multicast Rate
A
This setting specifies the transmit rate to be used for sending multicast
network traffic. The selected Protocol and Channel Bonding
settings will
affect the rate options and values available here.
IGMP Snooping
A
To allow the Pepwave router to listen to internet group management protocol
(IGMP) network traffic, select this option.
DHCP Option 82
A
If you use a distributed DHCP server/relay environment, you can enable this
option to provide additional information o
n the manner in which clients are
physically connected to the network.
Layer 2 Isolation
A
Layer 2
refers to the second layer in the ISO Open System Interconnect
model.
When this option is enabled, clients on the same VLAN, SSID, or subnet are
isolated to that VLAN, SSID, or subnet, which can enhance security. Traffic is
passed to the upper communication layer(s).
By default, the setting is
disabled.
Maximum Number of
Clients
Indicate the maximum number of clients that should be able to connect to
each frequency.
A
- Advanced feature. Click the button on the top right-hand corner to activate.
Security Settings
Security Policy
This setting configures the wireless authentication and encryption methods.
Available options :
● Open (No Encryption)