User's Manual
Table Of Contents
- Introduction and Scope
- Glossary
- 1 Product Features
- 2 Overview
- 3 Installation
- 4 Connecting to the Web Admin Interface
- 5 SpeedFusion Cloud
- 6 Configuring the LAN Interface(s)
- 7 Configuring the WAN Interface(s)
- 8 Advanced Wi-Fi Settings
- 9 ContentHub Configuration
- 10 MediaFast Configuration
- 11 Bandwidth Bonding SpeedFusionTM / PepVPN
- 12 IPsec VPN
- 13 Outbound Policy Management
- 14 Inbound Access
- 15 NAT Mappings
- 16
- 17 Firewall
- 20 Remote User Access
- 21 Miscellaneous Settings
- 22 AP - access point
- 24 AP Controller Status
https://www.peplink.com
131
Copyright @ 2020 Pepwave
20.3 PPTP
No additional configuration required.
The Point-to-Point Tunneling Protocol (PPTP) is an obsolete method for implementing virtual
private networks. PPTP has many well known security issues
Continue to configure authentication method.
20.4 Authentication Methods
Authentication Method
Connect to
Network
Select the VLAN network for remote users to enable remote user access on.
Authentication
Determine the method of authenticating remote users
User accounts:
This setting allows you to define the Remote User Accounts.
Click Add to input username and password to create an account. After adding the user accounts,
you can click on a username to edit the account password.
Note:
The username must contain lowercase letters, numerics, underscore(_), dash(-), at sign(@),
and period(.) only.
The password must be between 8 and 12 characters long.
LDAP Server: