Users Manual

https://www.peplink.com 282 Copyright @ 2021 Peplink
16.1.3 ClientList 
The client list table is located at Status>Client List. It lists DHCP and online client IP addresses, names
(retrieved from the DHCP reservation table or defined by users), current download and upload rate, and
MAC address.
Clients can be imported into the DHCP reservation table by clicking the button on the right. Further
update the record after the import by going to Network>LAN.
If the PPTP server SpeedFusion
TM
, or AP controller is enabled, you may see the corresponding connection
name listed in the Name field.
In the client list table, there is a “Ban Client” feature which is used to disconnect the Wi-Fi and Remote
User Access clients by clicking the button on the right.
There is a blocklist on the same page after you banned the Wi-Fi or Remote User Access clients.
You may also unblock the Wi-Fi or Remote User Access clients when the client devices need to
reconnect the network by clicking the button on the right.