Users Manual
https://www.peplink.com 267 Copyright @ 2021 Peplink
● DES
When DES is selected, an entry field will appear for the password.
15.1.8
SMSControl
SMS Control allows the user to control the device using SMS even if the modem does not have a data
connection. The settings for configuring the SMS Control can be found at System>SMS Control.
Note: Supported Models
●
Balance/MAX: *-LTE-E, *-LTEA-W, *-LTEA-P, *-LTE-MX
●
EPX: *-LW*, *-LP*
When this box is checked, the device will be allowed to take actions according to received commands via
SMS.
Make sure your mobile plan supports SMS, and note that some plans may incur additional charges for
this.
SMS Control can reboot devices and configure cellular settings over signalling channels, even if the
modem does not have an active data connection.
For details of supported SMS command sets, please refer to our knowledge base.
SMS Control Settings
Enable
Click the checkbox to enable the SMS Control.
Password
This setting sets the password for authentication - maximum of 32 characters, which
cannot include semicolon (;).
White List
Optionally, you can add phone number(s) to the whitelist. Only matching phone
numbers are allowed to issue SMS commands. Phone numbers must be in the
E.164 International Phone Numbers format.