Users Manual

https://www.peplink.com 239 Copyright @ 2021 Peplink
RADIUS Server Settings
Host
Enter the IP address of the primary RADIUS server and, if applicable, the secondary RADIUS
server.
Secret
Enter the RADIUS shared secret for the primary server and, if applicable, the secondary
RADIUS server.
Authentication
Port
In the field, enter the UDP authentication port(s) used by your RADIUS server(s) or click the
Default button to enter 1812.
Accounting
Port
In the field, enter the UDP accounting port(s) used by your RADIUS server(s) or click the
Default button to enter 1813.
NAS-Identifier
Choose between Device Name, LAN MAC address, Device Serial Number and Custom
Value
14.1.3 WirelessMesh 

Wireless Mesh Support is available on devices running 802.11ac (Wi-Fi 5) and above. Along with the AP
Controller, mesh network extensions can be established, which can expand network coverage. Note that
the Wireless Mesh settings need to match the Mesh ID and Shared Key of the other devices on the same
selected frequency band.
To create a new Wireless Mesh profile, go to AP > Wireless Mesh, and click Add.