Users Manual

https://www.peplink.com 236 Copyright @ 2021 Peplink
SSID Settings
SSID
This setting specifies the SSID of the virtual AP to be scanned by Wi-Fi clients.
Enable
Click the drop-down menu to apply a time schedule to this interface
VLAN
This setting specifies the VLAN ID to be tagged on all outgoing packets generated from
this wireless network (i.e., packets that travel from the Wi-Fi segment through the
Pepwave AP One unit to the Ethernet segment via the LAN port). The default value of
this setting is 0, which means VLAN tagging is disabled (instead of tagged with zero).
Use of a VLAN pool is enabled by selecting the checkbox.
Broadcast SSID
This setting specifies whether or not Wi-Fi clients can scan the SSID of this wireless
network. Broadcast SSID is enabled by default.
Data Rate
A
Select Auto to allow the Pepwave router to set the data rate automatically, or select
Fixed and choose a rate from the displayed drop-down menu.
Multicast Filter
A
This setting enables the filtering of multicast network traffic to the wireless SSID.