Users Manual

https://www.peplink.com 211 Copyright @ 2021 Peplink
To access RIPv2 settings, click on .
RIPv2 Settings
Authentication
If an authentication method is used, select one from this drop-down menu. Available options
are MD5 and Text. Authentication key(s) may be input next to the drop-down menu after
selecting an authentication method.
Interfaces
Select the interface(s) that this area will use to listen to and deliver RIPv2 packets.
OSPF & RIPv2 Route Advertisement
PepVPN Route
Isolation
Isolate PepVPN peers from each other. Received PepVPN routes will not be forwarded to other
PepVPN peers to reduce bandwidth consumption..
Network
Advertising
Networks to be advertised over OSPF & RIPv2. If no network is selected, all LAN / VLAN
networks will be advertised by default.
Static Route
Advertising
Enabling OSPF & RIPv2 Route Advertising allows it to advertise LAN static routes over OSPF
& RIPv2. Static routes on the Excluded Networks table will not be advertised.