Users Manual

https://www.peplink.com 152 Copyright @ 2021 Peplink
Expert Mode is available on some Pepwave routers for use by
advanced users. To enable the feature, click on the help icon and
click turn on Expert Mode.
In Expert Mode, a new special rule, SpeedFusion
TM
Routes, is
displayed in the Custom Rules table. This rule represents all
SpeedFusion
TM
routes learned from remote VPN peers. By default,
this bar is on the top of all custom rules. This position means that
traffic for remote VPN subnets will be routed to the corresponding
VPN peer. You can create custom Priority or Enforced rules and
move them
above the bar to override the SpeedFusion
TM
routes.
Upon disabling Expert Mode, all rules above the bar will be
removed.
Algorithm:WeightedBalance 
This setting specifies the ratio of WAN connection usage to be applied on the specified IP protocol and port.
This setting is applicable only when Algorithm is set to Weighted Balance.
The amount of matching traffic that is distributed to a WAN connection is proportional to the weight of the
WAN connection relative to the total weight. Use the sliders to change each WAN’s weight.
For example, with the following weight settings:
● Ethernet WAN1: 10
● Ethernet WAN2: 10
● Wi-Fi WAN: 10
● Cellular 1: 10
● Cellular 2: 10