Users Manual

https://www.peplink.com 147 Copyright @ 2021 Peplink
13.4 Outbound Policy 
Outbound policies for managing and load balancing outbound traffic are located at
Network>Outbound Policy. Click the button beside the Outbound Policy box:
A selection menu will appear, giving you the choice between three different Outbound Policy Settings:
Outbound Policy Settings
High
Application
Compatibility
Outbound traffic from a source LAN device is routed through the same WAN connection
regardless of the destination Internet IP address and protocol. This option provides the
highest application compatibility.
Normal
Application
Compatibility
Outbound traffic from a source LAN device to the same destination Internet IP address will
be routed through the same WAN connection persistently, regardless of protocol. This option
provides high compatibility to most applications, and users still benefit from WAN link load
balancing when multiple Internet servers are accessed.
Custom
Outbound traffic behavior can be managed by defining rules in a custom rule table. A default
rule can be defined for connections that cannot be matched with any of the rules.
The menu underneath enables you to define Outbound policy rules:
The bottom-most rule is Default. Edit this rule to change the device’s default manner of controlling outbound