Users Manual
https://www.peplink.com 122 Copyright @ 2021 Peplink
BandwidthAllowanceMonitorSettings
Bandwidth Allowance Monitor
Action
If Email Notification is enabled, you will be notified by email when usage hits 75% and 95%
of the monthly allowance.
If Disconnect when usage hits 100% of monthly allowance is checked, this WAN
connection will be disconnected automatically when the usage hits the monthly allowance. It
will not resume connection unless this option has been turned off or the usage has been reset
when a new billing cycle starts.
Start Day
This option allows you to define which day of the month each billing cycle begins.
Monthly
Allowance
This field is for defining the maximum bandwidth usage allowed for the WAN connection each
month.
Disclaimer
Due to different network protocol overheads and conversions, the amount of data reported by this Peplink device is
not representative of actual billable data usage as metered by your network provider. Peplink disclaims any
obligation or responsibility for any events arising from the use of the numbers shown here.
AdditionalPublicIPSettings