Users Manual

https://www.peplink.com 118 Copyright @ 2021 Peplink
Clone
client to always use the same MAC address to connect to the network. If it is the case, you
may change the WAN interface's MAC address to the client PC's one by entering the PC's
MAC address to this field. If you are not sure, click the Default button to restore to the default
value.
VLAN
Check the box to assign a VLAN to the interface.
DHCP Settings
Hostname
(Optional)
If your service provider's DHCP server requires you to supply a hostname value upon
acquiring an IP address, you may enter the value here. If your service provider does not
provide you with a hostname, you can safely bypass this option.
DNS Servers
Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies the
DNS (Domain Name System) servers to be used when a DNS lookup is routed through
this
connection.
Selecting Obtain DNS server address automatically results in the DNS servers assigned
by the WAN DHCP server being used for outbound DNS lookups over the connection. (The
DNS servers are obtained along with the WAN IP address assigned by the DHCP server.)
When Use the following DNS server address(es) is selected, you may enter custom DNS
server addresses for this WAN connection into the DNS server 1 and DNS server 2 fields.