Users Manual
https://www.peplink.com 115 Copyright @ 2021 Peplink
To define the threshold manually using specific signal strength values, please click on the question Mark
and the following field will be visible.
WANConnection Settings (USB)
WAN Connection Settings
WAN
Connection
Name
Indicate a name you wish to give this WAN connection
Enable
This setting enables the WAN connection. If schedules have been defined, you will be able to
select a schedule to apply to the connection.
DNS Server
Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies the
DNS (Domain Name System) servers to be used when a DNS lookup is routed through
this
connection.
Selecting Obtain DNS server address automatically results in the DNS servers assigned by
the WAN DHCP server being used for outbound DNS lookups over the connection. (The DNS
servers are obtained along with the WAN IP address assigned by the DHCP server.) When
Use the following DNS server address(es) is selected, you may enter custom DNS server
addresses for this WAN connection into the DNS server 1 and DNS server 2 fields.