Users Manual

on the underlined download text. After downloading the current config click the Ok button to
start the upgrade process. The firmware will now be applied to the router*. The amount of time
it takes for the firmware to upgrade will depend on the router that’s being upgraded.
*Upgrading the firmware will cause the router to reboot.
The InControl method
Described in this knowledgebase article on our forum.
28.3 Time
Time Settings enables the system clock of the Pepwave router to be synchronized with a
specified time server. Time settings are located at System>Time.
Time Settings
Time Zone
This specifies the time zone (along with the corresponding Daylight Savings Time
scheme). The Time Zone value affects the time stamps in the Pepwave router’s
event log and e-mail notifications. Check Show all to show all time zone options.
Time Server
This setting specifies the NTP network time server to be utilized by the Pepwave
router.
28.4 Schedule
Enable and disable different functions (such as WAN connections, outbound policy, and
firewalls at different times, based on a user-scheduled configuration profile. The settings for