Users Manual

Network Settings

Name

Enter a name for the LAN.

VLAN ID

Enter a number for the LAN.

Inter-VLAN

routing

Check this box to enable routing between virtual LANs.

Captive Portal

Check this box to turn on captive portals.

DHCP Server Settings

DHCP Server

When this setting is enabled, the Pepwave router’s DHCP server automatically

assigns an IP address to each computer that is connected via LAN and configured

to obtain an IP address via DHCP. The Pepwave router’s DHCP server can

prevent IP address collisions on the LAN.

To enable DHCP bridge relay, please click the icon on this menu item.

IP Range &

Subnet Mask

These settings allocate a range of IP addresses that will be assigned to LAN

computers by the Pepwave router’s DHCP server.

Lease Time

This setting specifies the length of time throughout which an IP address of a DHCP

client remains valid. Upon expiration of Lease Time, the assigned IP address will

no longer be valid and the IP address assignment must be renewed.

https://www.peplink.com