Users Manual

Layer 2 PepVPN Bridging

PepVPN Profiles

to Bridge

The remote network of the selected PepVPN profiles will be bridged with this local

LAN, creating a Layer 2 PepVPN, they will be connected and operate like a single

LAN, and any broadcast or multicast packets will be sent over the VPN.

Remote Network

Isolation

Enable this option if you want to block network traffic between the remote

networks, this will not affect the connectivity between them and this local LAN.

Spanning Tree

Protocol

Click the box will enable STP for this layer 2 profile bridge.

Override IP

Address when

bridge

connected

Select "Do not override" if the LAN IP address and local DHCP server should

remain unchanged after the Layer 2 PepVPN is up.

If you choose to override IP address when the VPN is connected, the device will

not act as a router, and most Layer 3 routing functions will cease to work.

DHCP Option 82

Click on the question Mark if you want to enable DHCP Option 82.

This allows the device to inject Option 82 with Router Name information before

forwarding the DHCP Request packet to a PepVPN peer, such that the DHCP

Server can identify where the request originates from.

https://www.peplink.com