Users Manual

https://www.peplink.com 120 Copyright @ 2019 Peplink
7.14.2 OpenVPN
Select OpenVPN and continue to configure the authentication method.
The OpenVPN Client profile can be downloaded from the Status > device page after the configuration
has been saved.
You have a choice between 2 different OpenVPN Client profiles.
8
"route all traffic" profile
Using this profile, VPN clients will send all the traffic through the OpenVPN tunnel
9
"split tunnel" profile
Using this profile, VPN clients will ONLY send those traffic designated to the
untagged LAN and VLAN segment through the OpenVPN tunnel.
9.1.1 PPTP
No additional configuration required.
The Point-to-Point Tunneling Protocol (PPTP) is an obsolete method for implementing virtual private
networks. PPTP has many well known security issues
Continue to configure authentication method.
9.1.2 Authentication Methods
Authentication Method
Connect to
Select the VLAN network for remote users to enable remote user access on.