Users Manual

https://www.peplink.com 119 Copyright @ 2019 Peplink
Restricted
Networks
This specifies the network in the “route import” entry
Exact Match: When this box is checked, only routes with the same Networks and
Subnet Mask will be filtered.
Otherwise, routes within the Networks and Subnet will be filtered.
Export to other
BGP Profile
When this box is checked, routes learnt from this BGP profile will export to other
BGP profiles.
Export to OSPF
When this box is checked, routes learnt from this BGP profile will export to the
OSPF routing protocol.
7.14 Remote User Access
A remote-access VPN connection allows an individual user to connect to a private business network from
a remote location using a laptop or desktop computer connected to the Internet. Networks routed by a
Peplink router can be remotely accessed via OpenVPN, L2TP with IPsec or PPTP. To configure this feature,
navigate to Network > Remote User Access and choose the required VPN type.
7.14.1 L2TP with IPsec
L2TP with IPsec Remote User Access Settings
Pre-shared Key
Enter your pre shared key in the text field. Please note that remote devices will
need this preshared key to access the Balance.
Listen On
This setting is for specifying the WAN IP addresses that allow remote user access.
Disable Weak
Ciphers
Click the button to show and enable this option.
When checked, weak ciphers such as 3DES will be disabled.
Continue to configure the authentication method.