Users Manual

https://www.peplink.com 114 Copyright @ 2019 Peplink
top bar, and then click the Routing Protocols > OSPF & RIPv2 item on the sidebar to reach the following
menu:
OSPF
Router ID
This field determines the ID of the router. By default, this is specified as the LAN IP
address. If you want to specify your own ID, enter it in the
Custom
field.
Area
This is an overview of the OSPFv2 areas you have defined. Click on the area name to
configure it. To set a new area, click
Add
. To delete an existing area, click .