User's Manual

https://www.peplink.com 63 Copyright @ 2019 Peplink

Expert Mode is available on some Pepwave routers for use by

advanced users. To enable the feature, click on the help icon and

click turn on Expert Mode

In Expert Mode, a new special rule, SpeedFusion

Routes, is

displayed in the Custom Rules table. This rule represents all

SpeedFusion

routes learned from remote VPN peers. By

default, this bar is on the top of all custom rules. This position

means that traffic for remote VPN subnets will be routed to the

corresponding VPN peer. You can create custom Priority or

Enforced rules and move them

above the bar to override the SpeedFusion

routes.

Upon disabling Expert Mode, all rules above the bar will be

removed.

Algorithm: Weighted Balance

This setting specifies the ratio of WAN connection usage to be applied on the specified IP protocol and

port. This setting is applicable only when Algorithm is set to Weighted Balance.

The amount of matching traffic that is distributed to a WAN connection is proportional to the weight of the

WAN connection relative to the total weight. Use the sliders to change each WAN’s weight.

For example, with the following weight settings:

● Ethernet WAN1: 10

● Ethernet WAN2: 10

● Wi-Fi WAN: 10

● Cellular 1: 10

● Cellular 2: 10

● USB: 10