User's Manual

https://www.peplink.com 54 Copyright @ 2019 Peplink
Normal - The total bandwidth consumption will be at most 2x of the original data traffic.
Medium - The total bandwidth consumption will be at most 3x of the original data traffic.
High - The total bandwidth consumption depends on the number of connected active
tunnels.
A
- Advanced feature, please click the button on the top right-hand corner to activate.
To enable Layer 2 Bridging between PepVPN profiles, navigate to Network>LAN>*LAN Profile Name*
8.41
WAN Connection Priority
WAN
Connection
Priority
If your device supports it, you can specify the priority of WAN connections to be used for
making VPN connections. WAN connections set to OFF will never be used. Only available
WAN connections with the highest priority will be used.
To enable asymmetric connections, connection mapping to remote WANs, cut-off latency,
and packet loss suspension time, click the
button.
Peplink Balance IPsec VPN functionality securely connects one or more branch offices to your
company's main headquarters or to other branches. Data, voice, and video communications between
these locations are kept safe and confidential across the public Internet.
IPsec VPN on the Peplink Balance is specially designed for multi-WAN environments. For instance, if a
user sets up multiple IPsec profiles for his multi-WAN environment and WAN1 is connected and healthy,
IPsec traffic will go through this link. However, should unforeseen problems (e.g.,unplugged cables or ISP
problems) cause WAN1 to go down, our IPsec implementation will make use of WAN2 and WAN3 for
failover.
Peplink also published a whitepaper about Speedfusion which can be downloaded from the following url:
http://download.peplink.com/resources/whitepaper-speedfusion-and-best-practices-2019.pdf