User's Manual

https://www.peplink.com 30 Copyright @ 2019 Peplink
If signal threshold is defined, this connection will be treated as down when a weaker than threshold signal
is determined.
The following values are used by the threshold scale:
To define the threshold manually using specific signal strength values, please click on the question Mark
and the following field will be visible.
WAN Connection Settings (Common)
The remaining WAN-related settings are common to both Ethernet and cellular WAN
Physical Interface Settings
Speed
This is the port speed of the WAN connection. It should be set to the same speed as the
connected device in case of any port negotiation problems.
When a static speed is set, you may choose whether to advertise its speed to the peer
device or not. Advertise Speed is selected by default. You can choose not to advertise the
port speed if the port has difficulty in negotiating with the peer device.