Installation Instructions

https://www.peplink.com

161

Email Notification Settings

Notification

This setting specifies whether or not to enable email notification. If Enable is

checked, the Pepwave router will send email messages to system administrators

when the WAN status changes or when new firmware is available. If Enable is

not checked, email notification is disabled and the Pepwave router will not send

email messages.

SMTP Server

This setting specifies the SMTP server to be used for sending email. If the server

requires authentication, check Require authentication.

SSL Encryption

Check the box to enable SMTPS. When the box is checked, SMTP Port will be

changed to 465 automatically.

SMTP Port

This field is for specifying the SMTP port number. By default, this is set to 25;

when SSL Encryption is checked, the default port number will be set to 465. You

may customize the port number by editing this field. Click Default to restore the

number to its default setting.

SMTP User

Name /

Password

This setting specifies the SMTP username and password while sending email.

These options are shown only if Require authentication is checked in the SMTP

Server setting.

Confirm SMTP

Password

This field allows you to verify and confirm the new administrator password.

Sender’s Email

Address

This setting specifies the email address the Pepwave router will use to send

reports.

Recipient’s

Email Address

This setting specifies the email address(es) to which the Pepwave router will send

email notifications. For multiple recipients, separate each email addresses using