Installation Instructions

https://www.peplink.com

158

the site may also be recommended or required for a couple of reasons.

All of the Peplink/Pepwave GA firmware can be found here Navigate to the relevant product

line (ie. Balance, Max, FusionHub, SOHO, etc). Some product lines may have a dropdown

that lists all of the products in that product line. Here is a screenshot from the Balance line.

If the device has more than one firmware version the current hardware revision will be

required to know what firmware to download.

Navigate to System > Firmware and click the Choose File button under the Manual Firmware

Upgrade section. Navigate to the location that the firmware was downloaded to select the

“.img” file and click the Open button.

Click on the Manual Upgrade button to start the upgrade process.

A prompt will be displayed advising to download the Current Active Configuration. Please click

on the underlined download text. After downloading the current config click the Ok button to

start the upgrade process. The firmware will now be applied to the router*. The amount of time

it takes for the firmware to upgrade will depend on the router that’s being upgraded.

*Upgrading the firmware will cause the router to reboot.

28.2.3 The InControl method

Described in this knowledgebase article on our forum.