Installation Instructions

https://www.peplink.com

138

When WPA/WPA2 - Enterprise is configured, RADIUS-based 802.1 x

authentication is enabled. Under this configuration, the Shared Key option should

be disabled. When using this method, select the appropriate version using the V1/V2

controls. The security level of this method is known to be very high.

When WPA/WPA2- Personal is configured, a shared key is used for data

encryption and authentication. When using this configuration, the Shared Key

option should be enabled. Key length must be between eight and 63 characters

(inclusive). The security level of this method is known to be high.

Access Control

Restricted

Mode

The settings allow administrator to control access using MAC address filtering.

Available options are None, Deny all except listed, and Accept all except listed

MAC Address

List

Connection coming from the MAC addresses in this list will be either denied or

accepted based on the option selected in the previous field.

If more than one MAC address needs to be entered, you can use a carriage return

to separate them.

RADIUS Server Settings

Host

Enter the IP address of the primary RADIUS server and, if applicable, the

secondary RADIUS server.