User's Manual

https://www.peplink.com
Copyright @ 2021 Pepwave
● Hold the left mouse button on the rule.
● Move it to the desired position.
● Drop it by releasing the mouse button.
Tip
If the default inbound rule is set to
Allow
for NAT-enabled WANs, no inbound Allow firewall rules will
be required for inbound port forwarding and inbound NAT mapping rules. However, if the default
inbound rule is set as Deny, a corresponding Allow firewall rule will be required.
19.1.2 Apply Firewall Rules to PepVpn Traffic
When this option is enabled, Outbound Firewall Rules will be applied to PepVPN traffic. To turn
on this feature, click , check the Enable check box, and press the Save button.
19.1.3 Intrusion Detection and DoS Prevention
Pepwave routers can detect and prevent intrusions and denial-of-service (DoS) attacks from
the Internet. To turn on this feature, click , check the Enable check box, and press the
Save button.
When this feature is enabled, the Pepwave router will detect and prevent the following kinds of
intrusions and denial-of-service attacks.
● Port scan
o NMAP FIN/URG/PSH
o Xmas tree
o Another Xmas tree
o Null scan
o SYN/RST
o SYN/FIN
● SYN flood prevention
● Ping flood attack prevention