Users Manual Part 2

https://www.peplink.com 142 Copyright @ 2018 Pepwave
PPTP Server Settings
Listen On
This setting is for specifying the WAN connection(s) and IP address(es) that the
PPTP server should listen on.
Authentication
This setting is for specifying the user database source for PPTP authentication.
Three sources can be selected: Local User Accounts, LDAP Server, or RADIUS
Server.
Local User Accounts - User accounts are stored in the Pepwave router
locally. You can add/modify/delete accounts in the User Accounts table.
LDAP Server - Authenticate with an external LDAP server. This has been tested
with Open LDAP servers where passwords are NTLM hashed. Active Directory is
not supported. (You can choose to use RADIUS to authenticate with a Windows
server.)
RADIUS Server - Authenticate with an external RADIUS server. This has been
tested with Microsoft Windows Internet Authentication Service and FreeRADIUS