Users Manual Part 1

https://www.peplink.com 98 Copyright @ 2018 Pepwave
The local LAN subnet and subnets behind the LAN (defined under Static Route on the LAN
settings page) will be advertised to the VPN. All VPN members (branch offices and
headquarters) will be able to route to local subnets.
Note that all LAN subnets and the subnets behind them must be unique. Otherwise, VPN
members will not be able to access each other.
All data can be routed over the VPN using the 256-bit AES encryption standard. To configure,
navigate to Advanced>SpeedFusion™ or Advanced>PepVPN and click the New Profile
button to create a new VPN profile (you may have to first save the displayed default profile in
order to access the New Profile button). Each profile specifies the settings for making VPN
connection with one remote Pepwave or Peplink device. Note that available settings vary by
model.
A list of defined SpeedFusion connection profiles and a Link Failure Detection Time option will
be shown. Click the New Profile button to create a new VPN connection profile for making a
VPN connection to a remote Peplink Balance via the available WAN connections. Each profile is
for making a VPN connection with one remote Peplink Balance.
PepVPN Profile Settings
Name
This field is for specifying a name to represent this profile. The name can be any
combination of alphanumeric characters (0-9, A-Z, a-z), underscores (_), dashes (-
), and/or non-leading/trailing spaces ( ).