Users Manual Part 1

https://www.peplink.com 70 Copyright @ 2018 Pepwave
L2TP Username /
Password
Enter the required information in these fields in order to connect via L2TP to
your ISP.
The parameter values are determined by and can be obtained from your ISP.
Confirm L2TP
Password
Verify your password by entering it again in this field.
Server IP
Address / Host
L2TP server address is a parameter which is provided by your ISP.
Note: Leave this field blank unless it is provided by your ISP.
Address Type
Your ISP will also indicate whether the server IP address is Dynamic or Static.
Please click the appropriate value.
DNS Servers
Each ISP may provide a set of DNS servers for DNS lookups. This setting
specifies the
DNS (Domain Name System) servers to be used when a DNS lookup is routed
through this
connection.
Selecting Obtain DNS server address automatically results in the DNS
servers assigned
by the PPPoE server to be used for outbound DNS lookups over the WAN
connection.
(The DNS servers are obtained along with the WAN IP address assigned from
the PPPoE
server.)
When Use the following DNS server address(es) is selected, you can enter
custom DNS server addresses for this WAN connection into the DNS server 1
and DNS server 2 fields.
10.2 Cellular WAN