User Manual

https://www.peplink.com Copyright @ 2020 Pepwave
additional power. Please note that using this option with several APs in close
proximity will lead to increased interference.
Client Signal
Strength
Threshold
A
This field determines that maximum signal strength each individual client will
receive. The measurement unit is megawatts.
Max number of
Clients
A
This field determines the maximum clients that can be connected to APs unde
r
this profile.
Management VLAN
ID
This field specifies the VLAN ID to tag to management traffic, such as AP to AP
controller communication traffic. The value is 0 by default, meaning that no VLAN
tagging will be applied. NOTE: change this value with cau
tion as alterations may
result in loss of connection to the AP controller.
Operating
Schedule
Choose from the schedules that you have defined in System>Schedule
. Select
the schedule for the integrated AP to follow from the drop-down menu.
Beacon Rate
A
This drop-
down menu provides the option to send beacons in different transmit
bit rates. The bit rates are 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, and 11Mbps.
Beacon Interval
A
This drop-
down menu provides the option to set the time between each beacon
send. Available options are 100ms, 250ms, and 500ms.
DTIM
A
This field provides the option to set the frequency for beacon to include delivery
traffic indication message (DTIM). The interval unit is measured in milliseconds.
RTS Threshold
A
This field provides the option to set the minimum packet size for the unit to send
an RTS using the RTS/CTS handshake. Setting 0 disables this feature.
Fragmentation
Threshold
A
Determines the maximum size (in bytes) that each packet fragment will be broken
down into. Set 0 to disable fragmentation.
Distance/Time
Converter
A
Select the distance you want your Wi-
Fi to cover in order to adjust the below
parameters. Default values are recommended.
Slot Time
A
This field provides the option to modify the unit wait time before it transmits. The
default value is 9 .
ACK Timeout
A
This field provides the option to set the wait time to receive acknowledgement
packet before doing retransmission. The default value is 48 .
Frame
Aggregation
A
With this feature enabled, throughput will be increased by sending two or more
data frames in a single transmission.
Frame Length
This field is only available when Frame Aggregation
is enabled. It specifies the
frame length for frame aggregation. By default, it is set to 50000.
A
- Advanced feature. Click the button on the top right-hand corner to activate.