Product Card
Table Of Contents
- 16 Port Forwarding
- 17 NAT Mappings
- 18 QoS
- 19 Firewall
- 20 Routing Protocols
- 21 Remote User Access
- 22 Miscellaneous Settings
- 23 AP
- 24 AP Controller Status
- 25 Toolbox
- 26 System Settings
- 27 Tools
- 28 Status
- 29 WAN Quality
- 30 Usage Reports
- Appendix A: Restoration of Factory Defaults
- Appendix B: Declaration
https://www.peplink.com
142
Copyright @ 2021 Pepwave
You have a choice between 2 different OpenVPN Client profiles:
● "route all traffic" profile
Using this profile, VPN clients will send all the traffic through the OpenVPN tunnel
●
"split tunnel" profile
Using this profile, VPN clients will ONLY send those traffic designated to the untagged
LAN and VLAN segment through the OpenVPN tunnel.
2 1. 3 PPTP
No additional configuration required.
The Point-to-Point Tunneling Protocol (PPTP) is an obsolete method for implementing virtual
private networks. PPTP has many well known security issues
Continue to configure authentication method.
2 1. 4 Authentication Methods
Authentication Method
Connect to
Network
Select the VLAN network for remote users to enable remote user access on.
Authentication
Determine the method of authenticating remote users
User accounts:
This setting allows you to define the Remote User Accounts.
Click Add to input username and password to create an account. After adding the user accounts,
you can click on a username to edit the account password.
Note:
The username must contain lowercase letters, numerics, underscore(_), dash(-), at sign(@),
and period(.) only.
The password must be between 8 and 12 characters long.