User's Manual

https://www.peplink.com 25 Copyright @ 2019 Peplink
If you are not using drop-in mode, select the connection method for the WAN connection(s) from
the following screen:
Depending on the selection of connection type, further configuration may be needed. For
example, PPPoE and static IP require additional settings for the selected WAN port. Please refer
to Section 13, Configuring the WAN Interface(s) for details on setting up DHCP, static IP, and
PPPoE.
If Mobile Internet Connection is checked, the setup wizard will move on to Operator Settings.
If Custom Mobile Operator Settings is selected, APN parameters are required. Some service
providers may charge a fee for connecting to a different APN. Please consult your service
provider for the correct settings.
Click on the appropriate check box(es) to select the preferred WAN connection(s). Connection(s)
not selected in this step will be used as backup only. Click Next >> to continue.