User's Manual

https://www.peplink.com 12 Copyright @ 2019 Peplink
● Built-in L2TP / PPTP VPN server
● Authenticate L2TP / PPTP clients using RADIUS and LDAP servers
● Multi-Site PepVPN Profile
● IPsec VPN for network-to-network connections (works with Cisco and Juniper only)
● L2TP / PPTP and IPsec passthrough
4.1.4 Inbound Traffic Management
● TCP/UDP traffic redirection to dedicated LAN server(s)
● Inbound link load balancing by means of DNS
4.1.5 Outbound Policy
● Link load distribution per TCP/UDP service
● Persistent routing for specified source and/or destination IP addresses per TCP/UDP
service
● Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms
● Time-based scheduling
4.1.6 AP Controller
● Configure and manage Pepwave AP devices
● Review the status of connected AP
4.1.7 QoS
● Quality of service for different applications and custom protocols
● User group classification for different service levels
● Bandwidth usage control and monitoring on group- and user-level
● Application prioritization for custom protocols and DSL optimization
4.1.8 Firewall
● Outbound (LAN to WAN) firewall rules
● Inbound (WAN to LAN) firewall rules per WAN connection
● Intrusion detection and prevention
● Specification of NAT mappings
● Web blocking
● Application blocking
● Time-based scheduling
● Outbound firewall rules can be defined by destination domain name
4.1.9 Captive Portal
● Social Wi-Fi Hotspot Support
● Splash screen of open networks, login page for secure networks
● Customizable built-in captive portal
● Supports linking to outside page for captive portal